Lexus ES 300h User Manual page 60

60
1-1. For safe use
Installing child restraints using a seat belt (child restraint lock function
belt)
Rear-facing ⎯ Infant seat/convertible seat
■
Place the child restraint system
1
on the rear seat facing the rear of
the vehicle.
Run the seat belt through the
2
child restraint system and insert
the plate into the buckle. Make
sure that the belt is not twisted.
Fully extend the shoulder belt and
3
allow it to retract to put it in lock
mode. In lock mode, the belt can-
not be extended.
While pushing the child restraint
4
system down into the rear seat,
allow the shoulder belt to retract
until the child restraint system is
securely in place.
After the shoulder belt has retracted
to a point where there is no slack in
the belt, pull the belt to check that it
cannot be extended.
ES300h_OM_OM33C75U_(U)