Speed Control - Dodge CHARGER Hellcat 2017 User Manual

O P E R A T I N G Y O U R V E H I C L E
Rotate the dimmer control up to the next detent position to fully brighten the odometer
and radio when the parking lights or headlights are on.
Rotate the dimmer control up to the last detent position to turn on the interior lighting.
If your vehicle is equipped with a touchscreen, the dimming is programmable through the
Uconnect system. Refer to "Uconnect Settings" in "Understanding Your Instrument
Panel" in your Owner's Manual on www.dodge.com/en/owners/manuals for further details.
Ambient Light Dimmer
Rotate the ambient light control up or down to increase or decrease the brightness of the
release handle, map pocket (if equipped), overhead and floor lighting when the parking
lights or headlights are on.
Rotate to extreme bottom position to turn off.

SPEED CONTROL

When engaged, the Speed Control takes over accelerator operations at speeds greater than
25 mph (40 km/h).
The Speed Control buttons are located on the right side of the steering wheel.
NOTE:
In order to ensure proper operation, the
Speed Control System has been designed to
shut down if multiple speed control func-
tions are operated at the same time. If this
occurs, the Speed Control System can be
reactivated by pushing the Speed Control
on/off button and resetting the desired ve-
hicle set speed.
To Activate
Push the on/off button to activate the
Speed Control.
READY" will appear on the instrument clus-
ter display to indicate the Speed Control is
on. To turn the system off, push the on/off
button a second time. "CRUISE CONTROL
OFF" will appear on the instrument cluster
display to indicate the Speed Control is off.
The system should be turned off when not
in use.
72
"CRUISE CONTROL
Speed Control Switches
1 — Push Cancel
2 — Push Set+/Accel
3 — Push Resume
4 — Push On/Off
5 — Push Set-/Decel