Uconnect 8.4/8.4 Nav Voice Recognition Quick Tips - Dodge CHARGER Hellcat 2017 User Manual

UCONNECT 8.4/8.4 NAV VOICE RECOGNITION QUICK TIPS

Introducing Uconnect
Start using Uconnect Voice Recognition with these helpful quick tips. It provides the key
Voice Commands and tips you need to know to control your Uconnect system.
If you see the NAV icon on the bottom bar, or in the Apps menus, of your touchscreen, you
have the Uconnect 8.4 NAV system. If not, you have a Uconnect 8.4 system.
Get Started
All you need to control your Uconnect system with your voice are the buttons on your
steering wheel.
1. Visit UconnectPhone.com to check mobile device and feature compatibility and to
find phone pairing instructions.
2. Reduce background noise. Wind noise and passenger conversations are examples of
noise that may impact recognition.
3. Speak clearly at a normal pace and volume while facing straight ahead. The micro-
phone is located in the headliner and aimed at the driver.
4. Each time you give a Voice Command, you must first push either the VR or Phone
button, wait until after the beep, then say your Voice Command.
5. You can interrupt the help message or system prompts by pushing the VR or Phone
button and saying a Voice Command from current category.
Uconnect Phone Button
tiate, answer, or end a phone call.
Uconnect Voice Recognition Button
1. Short Press: Push and release the VR
button to begin Radio, Climate, Naviga-
tion, and other embedded functions. Af-
ter you hear the single beep, say a com-
mand.
2. Long Press: Push and hold continuously
for a few seconds, then release the VR
button for Siri functions. After you hear
the familiar Siri "double beep," say a
command.
Phone Hang Up Button, Push to end a call.
, Push to ini-
.
1 — Uconnect Phone Button
2 — Uconnect Voice Recognition Button
3 — Phone Hang Up Button
E L E C T R O N I C S
Uconnect VR And Phone Buttons
139