Alcatel-Lucent 7710 SR OS Configuration Manual page 30

Configuring IP Router Parameters
Priority is optional when specifying the forwarding class of a static route, but once configured it
can only be deleted and returned to unspecified by deleting the entire static route.
Displaying QoS Information Associated with Routes
The following commands are enhanced to show the forwarding-class and priority associated with
the displayed routes:
•
•
•
•
•
This feature uses a qos keyword to the show>router>route-table command. When this option is
specified the output includes an additional line per route entry that displays the forwarding class
and priority of the route. If a route has no fc and priority information then the third line is blank.
The following CLI shows an example:
show router route-table [family] [ip-prefix[/prefix-length]] [longer | exact] [protocol protocol-
name] qos
An example output of this command is shown below:
A:Dut-A# show router route-table 10.1.5.0/24 qos
===============================================================================
Route Table (Router: Base)
===============================================================================
Dest Prefix
-------------------------------------------------------------------------------
10.1.5.0/24
-------------------------------------------------------------------------------
No. of Routes: 1
===============================================================================
A:Dut-A#
Page 30
show router route-table
show router fib
show router bgp routes
show router rip database
show router static-route
Next Hop[Interface Name]
QoS
PE1_to_PE2
h1, high
Type Proto
Remote BGP
7710 SR OS Router Configuration Guide
Age Pref
Metric
15h32m52s 0
0