Manual Operation And Setup 2 - HEIDENHAIN TNC 370 User Manual

2 Manual Operation and Setup
2.1 Moving the Machine
Axes .................................................................
2-2
Traversing with the axis direction keys .....................................................................
2-2
Traversing with the electronic handwheel
................................................................ 2-3
Working with the HR 330 electronic handwheel .......................................................
2-3
Positioning with manual data input ...........................................................................
2-4
Incremental jog positioning .......................................................................................
2-4
2.2 Spindle Speed S, Feed Rate F and Miscellaneous Functions
M
... 2-5
To enter the spindle speed S ....................................................................................
2-5
To change the spindle
speed S ................................................................................
2-5
To change the feed rate F ........................................................................................ 2-6
To enter the miscellaneous function
M .....................................................................
2-6
2.3 Setting the Datum without a 3D Touch Probe
.................................
2-7
Setting the datum in the tool axis ............................................................................
.2-7
Setting the datum in the working
plane .................................................................... 2-8
TNC 370