Setting The External Data Interface; Baud Rate - HEIDENHAIN TNC 370 User Manual

11
MOD Functions
L
11.5 Setting the External Data Interface
Two functions are available for setting the external data interface:
l
K-232-C INTERFACE
l
BAUD RATE
After pressing the soft key RS-232 SETUP, use the vertical arrow keys to
select the functions.
W-232-C Interface
The proper setting depends on the connected device.
Use the ENT key to select the required setting.
External
d&w
HEIDENHAIN FE 401 and FE 401 B
floppy disk units
L
L
HEIDENHAIN ME 101 magnetic tape
(no longer in production)
ME
Non-HEIDENHAIN units such as printers,
tape punchers, and PCs without TNC.EXE
No data transfer; e.g. digitizing without
transfer of digitized data, or operation
without connecting a device
EXT
-empty-
BAUD RATE
L
The baud rate is the speed of data transfer in bits per second. Use the
ENT key to select the required baud rate.
Available baud rates:
110, 150, 300, 600, 1200, 2400, 4800, 9600, 19 200, 38400 baud.
The ME 101 has a baud rate of 2400
L
TNC 370
11-5