The Tnc 320; Programming: Heidenhain Conversational And Iso Formats; Compatibility - HEIDENHAIN TNC 320 User Manual

2
Introduction
2.1

The TNC 320

2.1 The TNC 320
HEIDENHAIN TNC controls are workshop-oriented contouring
controls that enable you to program conventional machining
operations right at the machine in an easy-to-use conversational
programming language. They are designed for milling and drilling
machines, as well as machining centers, with up to 5 axes. You
can also change the angular position of the spindle under program
control.
Keyboard and screen layout are clearly arranged in such a way that
the functions are fast and easy to use.
Programming: HEIDENHAIN conversational and ISO
formats
The HEIDENHAIN conversational programming format is an
especially easy method of writing programs. Interactive graphics
illustrate the individual machining steps for programming the
contour. If a production drawing is not dimensioned for NC, the
FK free contour programming feature performs the necessary
calculations automatically. Workpiece machining can be graphically
simulated either during or before actual machining.
It is also possible to program the TNCs in ISO format or DNC
mode.
You can also enter and test one program while the control is
running another.

Compatibility

Machining programs created on HEIDENHAIN contouring controls
(starting from the TNC 150 B) may not always run on the TNC 320 .
If NC blocks contain invalid elements, the TNC will mark them as
ERROR blocks when the file is opened.
see "Functions of the TNC 320 and the iTNC 530
compared", page 549. Please also note the
detailed description of the differences between the
iTNC 530 and the TNC 320
64
TNC 320 | User's Manual
HEIDENHAIN Conversational Programming | 3/2014