D-Link COVR-P2502 User Manual page 40

Section 4 - Adding Additional Extenders
Using Wi-Fi Protected Setup (WPS) (continued)
3. Press the WPS button on the side of the new extender for 1 second. If
done correctly, the Power LED will start to flash. Next, press the WPS
button on the side of the existing extender within 120 seconds.
4. Wait for the Powerline LED on both the new and existing extender to
light up solid green. This indicates the new extender has successfully
synced with your existing Covr Powerline network.
5. Unplug the new extender and relocate it anywhere in your home
where you want to extend coverage to. Repeat this process to add
additional COVR-P2500 extenders.
D-Link COVR-P2502 User Manual
<120 s
n
G
1s
n
G
G
1
G
1s
n 1
G
G
37