Nmea 2000 Considerations; Specifications - Garmin ECHOMAP PLUS 60 series Installation Instructions Manual

NMEA 2000 Considerations
®
If you are connecting this device to an existing NMEA 2000
network, the NMEA 2000 network should already be connected
to power. Do not connect the NMEA 2000 power cable to an
existing NMEA 2000 network, because only one power source
should be connected to a NMEA 2000 network.
If you are connecting this device to an existing NMEA 2000
network or engine network by another manufacturer, you should
install a NMEA 2000 Power Isolator (010-11580-00) between
the existing network and the Garmin devices.
If you are installing a NMEA 2000 power cable, you must
connect it to the boat ignition switch or through another in-line
switch. NMEA 2000 devices will drain your battery if the NMEA
2000 power cable is connected to the battery directly.
NOTE: NMEA 2000 is not available on all models.
NMEA 2000 compatible models can connect to a NMEA 2000
network on your boat to share data from NMEA 2000 compatible
devices such as sensors or a VHF radio. The necessary NMEA
2000 cables and connectors are sold separately.
If you are unfamiliar with NMEA 2000, you should read the
"NMEA 2000 Network Fundamentals" chapter of the Technical
Reference for NMEA 2000 Products. To download this
document, go to www.garmin.com
product page for your device.
The port labeled NMEA 2000 on the cradle is used to connect it
to a standard NMEA 2000 network.
Item Description
NMEA 2000 compatible Garmin device
NMEA 2000 drop cable
NMEA 2000 power cable
Ignition or in-line switch
12 Vdc power source
NMEA 2000 terminator or backbone cable
NMEA 2000 T-connector
NMEA 2000 terminator or backbone cable

Specifications

Model Specification
ECHOMAP Plus 60 Dimensions on cradle
series and bail mount with
swivel base (W x H x
D)
Clearance to nearest
obstruction
Weight
4
NOTICE
and select Manuals on the
Measurement
259.2 x 160.8 x 65.2 mm
3 5
(10 / x 6 /
16 16
in.)
1
80.0 mm (3 /
8
0.75 kg (1.6 lb.)
Model
ECHOMAP Plus 70
series
ECHOMAP Plus 90
series
Sonar models
9
x 2 /
16
in.)
Specification Measurement
Display size (W x H) 137.4 x 77.3 mm (5
1
3 /
16
Display type WVGA
Display resolution 400 x 800 pixels
1
Max. power draw 12 W
Typical current draw 0.7 A
1
at 12 Vdc (RMS)
Max. current draw at 1.25 A
1
12 Vdc (RMS)
Wireless frequencies Wi‑Fi
and protocols dBm nominal
ANT+
3.1 dBm nominal
Bluetooth
1.2 dBm nominal
Dimensions on cradle 259.4 x 154.3 x 63.2 mm
3
and bail mount (W x H (10 /
x D)
Clearance to nearest 114.7 mm (4
obstruction
Weight 0.77 kg (1.7 lb.)
Display size (W x H) 155.1 x 86.9 mm (6
7
3 /
16
Display type WVGA
Display resolution 400 x 800 pixels
1
Max. power draw 15 W, 9 W with a GT-52
transducer
Typical current draw 0.8 A
1
at 12 Vdc (RMS)
Max. current draw at 1.25 A
1
12 Vdc (RMS)
Wireless frequencies Wi‑Fi, 2.4 GHz @
and protocols 18.5 dBm nominal
ANT+, 2.4 GHz @
1.2 dBm nominal
Bluetooth, 2.4 GHz @
1.0 dBm nominal
Dimensions on cradle 303.3 x 177.9 x 65.1 mm
15
and bail mount (W x H (11
x D)
Clearance to nearest 114.7 mm (4
obstruction
Weight 1 kg (2.3 lb.)
Display size (W x H) 199.0 x 112.7 mm
13
(7 /
Display type WVGA
Display resolution 400 x 800 pixels
1
Max. power draw 18 W
Typical current draw 1 A
1
at 12 Vdc (RMS)
Max. current draw at 1.5 A
1
12 Vdc (RMS)
Wireless frequencies Wi‑Fi, 2.4 GHz @
and protocols 18.5 dBm nominal
ANT+, 2.4 GHz @
1.2 dBm nominal
Bluetooth, 2.4 GHz @
1.0 dBm nominal
2
Frequencies Traditional: 50, 77, 83, or
200 kHz
CHIRP Garmin ClearVü:
260, 455, or 800 kHz
CHIRP SideVü: 260, 455,
or 800 kHz
Transmit power 500 W
1
(RMS)
7
/ x
16
in.)
® , 2.4 GHz @ 17.2
, 2.4 GHz @
®
, 2.4 GHz @
®
1 1
x 6 / x 2 / in.)
16 16 2
1
/ in.)
2
1
/ x
8
in.)
9
/ x 7 x 2 / in.)
16 16
1
/ in.)
2
13
x 4 / in.)
16 16