Panasonic KX-HNC805C Installation Manual page 19

R If more than 1 item named
6
Start the [Home Network]
app again.
7
If necessary, enter the
password required to connect
to your wireless router and
then tap [Next].
R The camera and your
R If prompted, follow the
R If you enter the wrong Wi-Fi
8
When prompted, press the
MWi-Fi SETUPN button on the
camera.
R Your mobile device will be
9
When prompted, follow the
on-screen instructions and set
the password used to log in to
For assistance, visit www.panasonic.ca/english/support
HNC805C_(en-en)_0420_shinsei.pdf
"KX-HNC800_Panasonic" is
displayed, wait approx. 10
minutes and perform this
procedure from the
beginning.
mobile device connect to
your wireless router.
on-screen instructions and
connect your mobile device
to your wireless router, start
the app again, and then tap
[Add This Mobile Device].
password, [Setup failed.] is
displayed and the camera's
LED indicator lights. Repeat
the initial setup procedure
from the beginning.
registered to the camera.
19
the camera while away from
home.
10
When prompted, enter a
name for your mobile device
and then tap [OK].
R This setting allows you to
change the name assigned
to your device. It can help
you identify your mobile
device when performing
certain operations, such as
deregistering a mobile
device.
R The app's home screen is
displayed when initial setup
is complete.
Setup
19
2016/04/20 16:55:32