Initial Setup - Sharp LC-45GX6U Operation Manual

Watching TV

Initial setup

When you turn on the TV for the first time, it will automatically memorize the broadcasting channels where you
live. Perform the following steps before you press TV POWER on the remote control unit.
1. Insert the batteries into the remote control unit. (See page 16.)
2. Connect the antenna cable to the AVC System. (See pages 20 to 22.)
3. Plug in the AC cord to the AC outlet. (See page 23.)
Language setting
Select from among 3 languages: English, French and
Spanish.
1
Press a/b to select the desired language
listed on the screen, and then press ENTER.
Language
Air/Cable
CH Search
Antenna setting
Make sure what kind of connection is made with your System
when selecting "Air" or "Cable" for both ANALOG-A, B and
DIGITAL.
2
Press c/d to select "Air" or "Cable" for
ANALOG-A, then press a/b to move down.
Press c/d to select "Air" or "Cable" for
ANALOG-B, then press a/b to move down.
Press c/d to select "Air" or "Cable" for
DIGITAL, then press a/b to move down.
Press ENTER to enter the setting.
• This operation makes the System search for
both ANALOG-A, B and DIGITAL.
• There are 3 kinds of CATV system, including
Standard, HRC and IRC. Select the one
matches to your System. Select Auto when you
do not know which one to select for ANALOG
antenna.
Language
Air/Cable
CH Search
NOTE
• For digital, the "Cable" option will be displayed only when
the CableCARD is inserted.
English
Français
Español
Example
ANALOG-A Air
ANALOG-B Air
DIGITAL Air
Channel search
Channel auto search makes the System look for all
channels viewable in the set area.
3
Press c/d to select "Yes" for ANALOG-A,
then press a/b to move down.
Press c/d to select "Yes" for ANALOG-B,
then press a/b to move down.
Press c/d to select "Yes" for DIGITAL (Air/
Cable), and press a/b to move down.
Select "Search Start", and then press
ENTER.
Language
Air/Cable
CH Search
Example
CH Search
ANALOG-A Air
CH Search
ANALOG-B Air
CH Search
DIGITAL Air
ANALOG-A
NOTE
• Make sure what kind of connection is made with your
System when selecting "Air" or "Cable" for both ANALOG-
A, B and DIGITAL.
• If no channel is found, make sure what kind of connection
is made with your TV and try EZ Setup again (see page
31).
ANALOG-A Yes No
ANALOG-B Yes No
DIGITAL (Air) Yes No
Search Start
[ 25 ] Found [ 20 ]
[ 25 ] Found [ 20 ]
[ 25 ] Found [ 25 ]
Air
2
Audio : MONO
25