Selecting A D-Vhs Deck (I.link); Disabling The System's Operation Of A D-Vhs Deck (I.link) - Sharp LC-45GX6U Operation Manual

Using external equipment

Selecting a D-VHS deck (i.LINK)

• In order to control a D-VHS deck from the System,
you must first choose the D-VHS deck to be
controlled.
• One D-VHS deck can be chosen from up to 16 i.LINK
connected decks.
• All D-VHS decks connected with i.LINK cables
should automatically appear in the selection screen.
1
Press i.LINK to display the i.LINK control
panel.
1
STOP
• When there is no D-VHS deck connected, the
message "No i.LINK model is available" appears. In
this case, please connect a D-VHS deck. (See page
60.)
• When there is no D-VHS deck selected, the selection
screen appears. In this case, please go to step 3.
2
Press a/b/c/d to select "Model", and
press ENTER.
• Selection screen appears.
Type
3
Press a/b to select a device, and then press
ENTER.
• The control panel for the D-VHS deck appears.
NOTE
• Devices that cannot be used with this System will not
appear in the selection screen.
• When an item in the selection screen is grayed out, the
item is not recognized by the System and cannot be
selected. (The item may not be connected properly.)
62
Model
0 0 : 0 0 : 0 0 PWR
D-VHS PLAY
Manufacturer Model
Disabling the System's operation of a D-
VHS deck (i.LINK)
• By disabling the System's operation of a D-VHS deck,
the deck can be operated from another i.LINK
device.
1
Press i.LINK to display the i.LINK control
panel.
STOP
Input
• When there is no D-VHS deck connected, "No i.LINK
model is available" appears. Please connect one.
(See page 60.)
• When there is no D-VHS deck selected, the selection
screen appears. Please go to step 3.
2
Press a/b/c/d to select "Model", and
press ENTER.
• Selection screen appears.
3
Press b to select "Cancel Connection" and
press ENTER.
• Operation of the D-VHS deck from the System
is disabled.
1
0 0 : 0 0 : 0 0 PWR
D-VHS PLAY
Type Manufacturer Model
Type Manufacturer Model
Cancel Connection
Model Input