Using The Line In/Out Sockets; External Antennas; Ant. Selector Switch: Ext Or Int - Eton FIELD BT Owner's Manual

FIELD BT OWNER'S MANUAL
stereo if the signal is sent in stereo and the ST position
is selected with the BANDWIDTH switch. The internal
speaker will be muted when a device is connected to the
Earphone jack.
USING THE LINE IN/OUT SOCKETS
These sockets are on the right side of the FIELD BT, an 1/8
inch stereo type (3.5 mm). An external audio device (such
as an MP3 player) can be played by connecting an AUX
line from the device into the Line-In socket When a device
is connected to the Line-in socket the word "AUX" will be
displayed on the screen.
The Line-Out socket can be used to feed audio from the
FIELD BT to amplified external speakers. The internal
speaker will still be functional when a device is connected
to the Line-Out socket
EXTERNAL ANTENNAS
ANT. SELECTOR SWITCH: EXT or INT
Use this switch to enable the use of FM or SW internal or
external antennas.
MW EXT. ANT.- This is a 500 ohm impedance socket, for
use with long wire antennas.
FM/SW EXT. ANT.socket- Located on the back of the radio
is primarily for antennas designed to be fed with 50 or 75
16