TRENDnet User's Guide
PIN (Personal Identification Number)
Wireless 2.4GHz
>
WPS
1
Log into your access point management page (refer to
on page
10).
2
Click Wireless 2.4GHz > WPS.
3
In WPS Config section enable the WPS feature.
4
Enable or disable the WPS External Registrar Lock.
5
In the WPS Action section, enter the 8-digit pin number and click Start Push Button to
add a wireless device to your network.
The PIN number is listed in WPS Summary > AP PIN.
ÍNote:
6
Wait for your access point to finish the WPS process.
The procedure is complete when the WPS Current Status in WPS Summary section
becomes back "Idle".
© Copyright 2015 TRENDnet. All Rights Reserved.
"Log in to Management Page"
Configure Management VLAN Settings
Management
>
Management VLAN
This feature is only available under Access Point or WDS AP mode and allows users
to configure the 802.1q VLAN settings to for all wireless clients. A VLAN is a group of
computers on a network whose software has been configured so that they behave as if
they were on a separate Local Area Network (LAN). Computers on VLAN do not have to
be physically located next to one another on the LAN.
To configure the management VLAN settings, do the following:
1
Log into your access point management page (refer to
on page
10).
2
Click Management > Management VLAN.
TEW-821DAP
"Log in to Management Page"
39