Configure Mac Filter Settings - TRENDnet TEW-821DAP User Manual

TRENDnet User's Guide
you must enter the Wireless Network Name (SSID) on the client manually to
connect to the network.
• Separate Stations: If you enable station separation, wireless clients (a.k.a. STAs)
associated with this SSID cannot communicate to each other directly even if they
are in the same wireless group.
• Security Mode: Please refer to
5
Click Apply to save the SSID information.
© Copyright 2015 TRENDnet. All Rights Reserved.

Configure MAC Filter Settings

Wireless 2.4GHz > Wireless MAC Filter
Every network device has a unique, 12-digit MAC (Media Access Control) address. Using
MAC filters, you can allow or deny specific computers and other devices from using this
access point's wireless network. You can enter up to 24 MAC address entries.
1
Log into your access point management page (refer to
on page 10).
2
Click Wireless 2.4GHz > Wireless Network.
3
On Filter Mode below, select one of the MAC filter function.
• Disable: Select this option to disable the MAC address filter.
• ALLOW listed computers access and deny all others: Select this option to only
allow computers/devices with MAC addresses listed to access the access point
management page and the Internet. Deny all others.
• DENY listed computers access and allow all others: Select this option to only
deny computers/devices with MAC addresses listed to access to the access point
management page and the Internet. Allow all others.
MAC filter can be configured to allow access to the listed MAC address and
ÍNote:
deny all others unlisted or vice versa. The recommended function is to choose to
only allow access to the MAC addresses listed and deny all others unlisted because
it is easier to determine the MAC addresses of devices in your network then to
determine which MAC addresses you do not want to allow access.
TEW-821DAP
"Log in to Management Page"
35