Table of Contents
Advertisement
5
LOOKING AFTER YOUR MACHINE-FILTERS
WARNING: Always switch off and unplug the vacuum cleaner from the electrical socket before assembling, opening or
emptying the dirt container, or before connecting/disconnecting the attachments.
IMPORTANT: Filters need to be cleaned every time you empty the dirt container for best cleaning results.
Do not use your vacuum cleaner without all of the filters in place.
IMPORTANT: The motor is equipped with a thermal cut-out. If for any reason the unit should overheat,
the thermostat will automatically turn the unit off.
Emptying and cleaning the dirt container
Remove dirt container by pushing
down the dirt container release button
and lifting the dirt container.
Cleaning the pre-motor filter
1
Hold the dirt container and twist the
lid anti-clockwise.
4
Tap excess dirt from the filter. Rinse under a tap and leave to dry for 24 hours.
The dirt release button located at the
rear of the dirt container.
2
Lift the lid to reveal the pre-motor
filter.
5
40˚C
40˚C
MAX
MAX
Hold dirt container over a bin and
press dirt release button to open,
allowing dirt to fall out.
3
Lift out the pre-motor filter.
6
24hr
Advertisement
Chapters
Table of Contents
