Dtmf Calls - Kenwood TK-7302 Instruction Manual

S R
CAN EVERT
The Scan Revert channel is the channel selected when you press the PTT switch
to transmit during scan. Your dealer can program one of the following types of
Scan Revert channels:
• Selected: The last channel selected before scan.
• Selected + Talkback: Same as "Selected", plus you can respond to calls on the
channel at which scan is paused.
• Priority: The Priority channel.
• Priority + Talkback: Same as "Priority", plus you can respond to calls on the channel
at which scan is paused.
• Last Called + Selected: The last channel on which you receive a call or the last
channel selected before scan, whichever operation occured latest.
Note: To make DTMF calls, you must use an optional microphone with a DTMF keypad.
M D
ANUAL IALING
1 Press and hold the PTT switch.
2 Enter the desired digits using the keypad.
• If Keypad Auto-PTT is enabled by your dealer, you do not need to press the PTT
switch to transmit; you can make the call simply by pressing the keys.
A
UTODIAL
Autodial allows you to quickly call DTMF numbers that have been programmed
onto your transceiver.
1 Press the key programmed as Autodial or the microphone
• "Ad" appears on the display.
2 Enter the desired memory location number (1 ~ 9).
3 Press the PTT switch to make the call.
R
EDIALING
1 Press the key programmed as Autodial or the microphone
• "Ad" appears on the display.
2 Press the microphone 0 key.
• "rd" appears on the display.
• If there is no data in the redial memory, an error tone will sound.
3 Press the PTT switch to make the call.
Note: Switching the transceiver power OFF clears the redial memory.

DTMF CALLS

key.
key.
7