Programmable Functions - Kenwood TK-7302 Instruction Manual

D
ISPLAY
The display shows the channel number and the 2 dots show various modes of
operation.
The left and right dots on the display can be programmed to indicate specific
modes of operation, as listed below.
• AUX
• Horn Alert
• Lone Worker
• Priority Channel
The right dot will blink during special operations (such as Autodial and OST).
The , , , , S, A, <B, C>, and
listed below. Ask your dealer for details on these functions.
• None
• 2-tone Encode
• AUX
• Autodial
• Channel Down
• Channel Entry
• Channel Up
• Direct Zone Channel
• Display Brightness
• Emergency
2
• Horn Alert
• Lone Worker
• Monitor
• Monitor Momentary
• Operator Selectable Tone
• Paging Call
Direct Zone Channel can be programmed only on the S, A, <B, C>, and
1
2 Emergency can be programmed only on the
4

PROGRAMMABLE FUNCTIONS

1
• Scan Delete/Add
• Scrambler
• Talk Around
• Zone Delete/Add
keys can be programmed with the functions
• Public Address
• Scan Del/Add
• Scan On/Off
• Scrambler
• Send the GPS Data
• Status 1
• Status 2
• Squelch Level
• Squelch Off
• Squelch Off Momentary
• Talk Around
• Volume Down
• Volume Up
• Zone Down
• Zone Up
key.
keys.