Pioneer PDP-434CMX Service Manual page 190

1
INSTALLATION OF THE UNIT
I
nstallation using the supplied display stand
Be sure to fix the supplied stand to the installation surface.
A
Use commercially available M8 bolts that are 25 mm longer
than the thickness of the installation surface.
1. Fix the supplied stand to the installation surface at
each of the 4 prepared holes using commercially
available M8 bolts .
B
Front
Rear
5
110 mm (4- /
16
C
2. Set this unit in the stand.
D
E
F
190
1
2
PDP-504CMX: 798 mm (31-7 /16 in.)
(Bolt hole thread pitch)
PDP-434CMX: 880 mm (31-7 /16 in.)
(Bolt hole thread pitch)
in.)
PDP-504CMX/1
2
3
3. Fix this unit using the supplied washer and bolt.
CAUTION
This display unit weighs at least 30 kg (67 lbs) and
has little front-to-back depth, making it very unstable
when stood on edge. As a result, two or more
persons should cooperate when unpacking, moving,
or installing the display.
3
4
1
Use a 6 mm ( / in.) hex
4
wrench to bolt them.
4