Pioneer PDP-434CMX Service Manual page 189

5
REMOTE CONTROL UNIT
1
2
3
4
5
6
7
8
5
6
1 SCREEN SIZE button
Press to select the screen size.
2 INPUT buttons
Press to select the input .
9
3 MENU button
Press to open and close the on-screen menu.
0
4 ADJUST ( 5 / ∞ / 3 / 2 ) buttons
Use to navigate menu screens and to adjust various settings on
-
the unit.
Usage of cursor buttons within operations is clearly indicated at
the bottom the on-screen menu display.
5 SET button
Press to adjust or enter various settings on the unit.
6 SUB INPUT button
=
During multi-screen display, use this button to change inputs to
subscreens.
7 SPLIT button
Press to switch to multi-screen display.
8 MUTING button
Press to mute the volume.
9 AUTO SET UP button
~
When using computer signal input, automatically sets the
!
[POSITION], [CLOCK] and [PHASE] to optimum values.
@ 0 STANDBY/ON button
Press to put the unit in operation or standby mode.
- DISPLAY button
Press to view the unit's current input and setup mode.
= POINT ZOOM button
Use to select and enlarge one part of the screen.
SWAP button During multi-screen display, use this button to
switch between main screen and subscreen.
! PIP SHIFT button
When using PinP mode with multi-screen display, use this
button to move the position of subscreen.
@ VOLUME (+/–) buttons
Use to adjust the volume.
PDP-504CMX/1
6
7
7
8
A
B
C
D
E
F
189
8