To Set Partitions Authorization*
Step 1. T05:PARTITIONS
1
Step 2. T05:PARTITIONS
1
Return to step 2
9 This setting can be performed only after completing steps 1 - 5 of section on page 7
10 You can now repeat steps 2 - 7 to program or edit another Proximity tag.
Bypass Zone
Enter the [USER SETTINGS] menu
press
.
Step 1. SET ZONE BYPASS
Z01: READY
Office 1
Z01: P1
Step 2.
Z04: NOT READY
Z04: P1
Step 3. Office 2
4
Step 4. <OK> TO BYPASS
Z04:BYPASSED
2 3
2 3
P2 P3
Click the
the zone you wish to bypass (or clear bypass), for
or
example, "Z04" for Zone 04. After several seconds
the LEDs on the respective device starts flashing
indicating "it's me".
P2 P3
When the display reads the zone you wish to bypass
press
The display now reads [<OK> TO BYPASS].
To bypass the selected zone press
A "Happy Tune" ☺sounds and the updated zone
status is now displayed i.e. [Z04: BYPASSED].
Use the Keypad keys
status of the partitions 1, 2 & 3, respectively.
When you are satisfied with the setting, for
example, User 5 is authorized with Partition 1 and 3
only, press
A "Happy Tune" ☺ sounds. The display confirms
the Partition setting.
, select the [SET ZONE BYPASS]
1
The first zone, Z01, is displayed.
or
8
8
1
2
3
to change the
to confirm.
10
2
3
button until the display reads
9
option and
5
8