Select Partition - ADT PM33 Quick Reference Manual

Setting Partitions
Partition Selection Process
Access to any desired partition is achieved through the use of an individual code
or proximity tag. It is not possible to access the INSTALLER MENU if one or more
partitions are in the AWAY modes.
Before attempting to perform any operation on any given partition(s), it is necessary
to perform the operations below which enable you to select the desired/allowed
partition(s) using the individual code or proximity tag:
PRESS RESULTING DISPLAY
#

SELECT PARTITION

Enter partition # (1 - 3)
PARTITION 1
Notes:
1. The "Sad Tune" will be heard when selecting a partition to which no sensors
/ peripherals were enrolled.
2. If a partition is enabled and no zones are assigned to the partition, the
icon will appear on the Keypad display.
4