Table of Contents
Advertisement
Setting Your System
To review the open zones click
of the first open zone detector (usually an open door or window sensor) will be
displayed. To fix the open zone, locate the sensor and secure it (close the door or
window) – see "device locator" below. Each click of
display another open zone or trouble indication. It is highly recommended to fix the
open zone(s), thus restoring the System to the state of "ready to arm". If you do not
know how to do this, consult your installer.
Note: To quit at any stage and to revert to the "READY" display, click
the Keypad.
Device Locator: The PowerMaster System has a powerful device locator that helps
you to identify open or troubled devices indicated on the LCD display. While the LCD
displays an open or faulty device, the LED on the respective device flashes indicating
"it's me". The "it's me" indication will appear on the device within max. 16 seconds
and will last for as long as the LCD displays the device.
If the System is READY proceed as shown below.
If the System is NOT READY review any open zone detectors to locate and secure
them.
If you want to arm using partitions, see "Partition Selection Process" and then
proceed as shown below.
PRESS
If Quick Arm is disabled
Vacate the premises (ARM AWAY)
on the Keypad. The details and location
RESULTING DISPLAY
ARMING AWAY
PRESENT TAG OR
ENTER CODE:
PLEASE EXIT NOW
or ↓ (Exit delay) ↓
2
on the Keypad will
-----
on
Advertisement
Table of Contents
