Disarming Your System - ADT PM33 Quick Reference Manual

Setting Your System
PRESS
Move to interior zone (ARM HOME)
ARM indicator on both the Keypad and PowerMaster panel lights steadily during
the armed state.

Disarming Your System

Enter the protected premises via a delayed zone. Upon detecting your entrance, the
System will start sounding the entry delay beeps alerting you to disarm the System
before the entry delay ends.
After disarming, different displays may appear indicating that the System is in a state
of alarm MEMORY. The MEMORY message will disappear only upon rearming the
System. To disarm the System, proceed as shown:
ARM indicator on both the Keypad and PowerMaster panel extinguishes during
the disarmed state. Disarming the System also stops the siren alarm, irrespective of
whether the alarm was initiated during the armed or the disarmed state.
PRESS
Enter code / present tag
RESULTING DISPLAY
ARMING AWAY
RESULTING DISPLAY
PRESENT TAG OR
ENTER CODE:
Code / present tag
3
-----