Main Specifications; Safety Information And Rules And Regulations For Wireless Lan; Regulatory Statements - Toshiba FlashAir WLSDTHNSWCAE User Manual

PRODUCT OR THE PRODUCT INSTRUCTIONS OR WARNINGS AT ANY TIME IN ITS SOLE
DISCRETION AND WITHOUT NOTICE. UPDATED INFORMATION WILL BE PROVIDED VIA
http://www.toshiba.co.jp/p-media/wwsite/index.htm
* SD, SDHC and SDXC Logos are trademarks of SD-3C, LLC.
* All other company product names may be registered trademarks of their respective companies.
* The card in this package is made in Japan.
© Copyright 2016-2017 Toshiba Corporation. All rights reserved.

11. Main Specifications

[Operating Ambience］ Temperature: -25～85℃(-13～185 ), Humidity:95%RH
[Size] 32.0（L）×24.0（W）×2.1mm（T）
[Weight] 2g
[Interface] SDHC Memory Card Standard
[Input Voltage] 2.7～3.6V(Max)
[Content of the Package] SDHC memory Card (1 pc), Card case (1 pc), User manual
[User Area] 7.4GB
[WLAN Supported Channel] 1～11ch

12. Safety Information and Rules and Regulations for wireless LAN

• Wireless LAN devices may cause interference with medical equipment such as cardiac pacemakers. If
you use personal medical equipment, consult with your physician and medical equipment instructions
before using the Product. The Product should not be used in environments with medical equipment
such as hospitals and medical offices, or near users of personal medical equipment.
•
Always turn off wireless functionality if the computer is near automatic control equipment or appliances
such as automatic doors or fire detectors. Radio waves can cause malfunction of such equipment,
possibly resulting in serious injury.
•
Do not use the Wireless LAN functionality near a microwave oven or in areas subject to radio
interference or magnetic fields. Interference from a microwave oven or other source can disrupt Wireless
LAN operation.
•
The transmission speed over the wireless LAN, and the distance over which the wireless LAN can reach,
may vary depending on surrounding electromagnetic environment, obstacles, access point design and
configuration, client design and software/hardware configurations. The transmission rate described is the
theoretical maximum speed as specified under the appropriate standard – the actual transmission speed
will be lower than the theoretical maximum speed.

Regulatory Statements

When being used in U.S/Canada (international roaming), the range is restricted to
2412-2462MHz and 1 – 11 channels.
Federal Communications Commission (FCC) Notice (USA)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and the receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Copyright© 2016-2017 TOSHIBA Corporation – Storage & Electronic Devices Solutions Company
7/12