Toshiba FlashAir WLSDTHNSWCAE User Manual page 10

The Product can be used with the devices which are compatible with 8GB SDHC memory cards.
Before using the Wireless LAN capability of the Product, please set Wireless LAN security options.
Do not format the Product with devices which are not compatible with the SDHC format. Formatting with devices which are not
compatible with SDHC could cause failure of the wireless LAN functionality of the Product
Security Notice in the use of Wireless LAN products
Wireless LAN sends and receives data between devices such as personal computers and access points by means of radio
transmission rather than network cables. Absent obstructions, radio transmission enables a wireless LAN connection.
Users should take appropriate security measures to prevent third parties from hacking or stealing data transmitted wirelessly.
Please review the security procedures in this manual carefully before using the Product.
Important message: Initial Settings
Be sure to change security key (password) before using. If you fail to do so, your data (e.g. Photos) may be stolen or
hacked by third party.
1. Using the Product in wireless LAN devices such as smartphones, Tablet PCs, etc.
(1) Insert the Product into a device (e.g. digital camera) which is compatible with SDHC memory cards.
(2) Turn on the device. The wireless LAN functionality of the Product will run automatically. Please take the security steps
described below as quickly as possible to prevent unauthorized users from inputting a security key. If an unauthorized party
configures security settings, you will need to initialize the card using FlashAir configuration software.
(3) Within five (5) minutes after turning on the device, connect to the Product according to the following steps using a wireless
LAN device (e.g. smartphone). Without any connection from a wireless LAN device within 5 minutes, wireless LAN functionality of
the Product will be automatically turned off. If wireless LAN functionality is turned off, please turn on the device again.
(4) Activate the wireless LAN feature of the device (e.g. smartphone). When the device searches available wireless LAN
networks, "flashair_xxxxxxxxxxxx(twelve-digit alphanumeric characters)" should appear.
(5) Select "flashair_xxxxxxxxxxxx". Enter the default security key "12345678" for the network, and the device will connect to the
Product.
(6) Please change the default security key. Open the browser of the device and enter the following address into the URL input
field.
http://flashair/
(7) The below screen (fig.1) should be displayed. Press the arrow and go to the next page.
Fig. 1
(8) When Figure 2 is displayed, enter a new network name in the SSID field and a new security key in the Password field. The
security key should have eight (8) to sixty three (63) characters. Do not use easy-to-guess password and please select a strong
password. Toshiba recommends you to make a note of your SSID and security key.
(9) This will complete your initial setup.
2. Setting up the card on a personal computer ("PC")*
*OS: Windows® XP, Windows Vista®, Windows® 7, Windows® 8, Windows® 10
(1) Insert the Product into the PC. Go to the Product's directory and double-click "FlashAir.exe" to install the Product's software.
Copyright© 2016-2017 TOSHIBA Corporation – Storage & Electronic Devices Solutions Company
Fig.2
10/12