Roland G-70 Service Notes page 34

SECOND GROUP OF TESTS (
1. VIDEO OUTPUT
2. AUDIO TEST
3. KEYSCAN
4.
5.
6.
7. PITCH CALIBRATION
8. SAVE SISTEM ON CARD
1 - VIDEO OUTPUT TEST
Press the USER PROGRAM 1 button, the display shows:
Remark: before carrying out the test, connect the G-70 VIDEO OUTPUT to the
appropriate "PAL / NTSC Video Monitor" by means of a shielded cable.
Pressing the USER PROGRAM 1 button, you will inter the PAL system test.
Pressing the USER PROGRAM 2 button, you will inter the NTSC system test.
Pressing the USER PROGRAM 5 button, you will inter the Bars / Monoscope test.
Check that the picture displayed on the video is clear and does not flicker both with the
PAL, NTSC systems and Bar / Monoscope videos.
To revert, press EXIT.
**** TEST MENU ( 2 / 2 ) ****)
**** TEST MENU ( 2 / 2 ) ****
Press LIST to scroll menu
**** VIDEO OUTPUT ****
1. PAL
2. NTSC
5.Bars / Monoscope
Press EXIT to Skip
G-70
39