Stanley MC521 Pro Installation And Operation Manual page 12

Index Min. Max.
Value Value
20 00 01
21 01 50
Note: Door must be cycled open for changes to be stored in permanent memory.
Status Code
00 Normal operation—All OK.
20 Breakout.
33 System error
A0 First installation sequence (FIS).
A1 Auto-configuration sequence.
A2 Auto-configuration confirmation sequence.
b1 Encoder error.
bE Lock Down (Shear Lock Energized)
dc Display door cycle counter
0b Obstruction
dE Delayed Egress
d0 Shear Lock De-Energized
E1 Upper hold beam sensor error
E2 Door held open
E3 Door length error
E4 Safety sensor error
E5 Inside activation sensor error
E6 Outside activation sensor error
E7 Lower hold beam sensor error
E8 Inside presence sensor error
E9 Outside presence sensor error
F0 Inside Active8 sensor failure
F1 Outside Active8 sensor failure
F2 Upper Telco hold beam sensor failure
F3 Lower Telco hold beam sensor failure
© 2010, THE STANLEY WORKS. ALL RIGHTS RESERVED.
Hold Beam Type
00 = Optex, 01 = Self-Contained
Lock Delay (0.1 – 0.5 sec)
Table 4. Status Codes
Description
Description
Defaults
Single
00
01
204066
Rev. A, 11/23/10
11 of 27
Dual
00
01