Install The Rack Rails - Dell SC7020 Owner's Manual

About this task
NOTE: Replacing rack rails must be performed during a scheduled maintenance window when the Storage Center system
is unavailable to the network.
Steps
1. Make sure all the cables are labeled.
2. Disconnect all of the cables from the storage system.
3. Loosen the screws in the chassis ears that secure the chassis to the rack.
Figure 10. Loosen the Screws
4. Remove the storage system from the rack.
5. Remove the rack rails from the rack.

Install the Rack Rails

Perform the following steps to install rack rails for an SC7020 series storage system.
Steps
1. Install the replacement rack rails in the rack.
2. Install the storage system in the rack.
3. Tighten the screws in the chassis ears that secure the chassis to the rack.
16
Replacing SC7020 Series Storage System Components