Factory Default Settings - Dell 2350 User Manual

computers. Microsoft Internet Explorer 4.0 or higher or Netscape 4.0 or higher must
be used for the web-based configuration tool.

Factory Default Settings:

Dell pre-configures the Wireless 2350 with the following settings:
NOTE: If you lose track of the device settings, you can reset the router by pushing the
reset button to restore these settings back to your router.
Setting
User Name
Password
Device Name
IP Address
Subnet Mask
10 Mbps Ethernet WAN IP
WAN DHCP Client
ESSID (wireless network name)
Channel
Encryption
DHCP Server
NAT Routing
NOTE: Your Wireless 2350 Broadband Router came with factory default settings that
should work for the majority of the network usage scenarios. However, there are
cases where your network environment may require a different router
configuration.
Default
admin
admin
Wireless 2350
192.168.2.1
255.255.255.0
<obtain from ISP via DHCP>
Enabled
wireless
6
No Encryption
Enabled
Enabled