Factory Default Settings - Dell TrueMobile 2350 User Manual

Back to Contents Page

Factory Default Settings:

Dell™ Wireless 2350 Broadband Router User's Guide
Dell pre-configures the Dell Wireless 2350 Broadband Router with the following settings:
NOTE: If you lose track of the device settings, you can reset the router by pushing the reset button to restore these settings
back to your router.
Setting
User Name
Password
Device Name
IP Address
Subnet Mask
10 Mbps Ethernet WAN IP
WAN DHCP Client
ESSID (wireless network name)
Channel
Encryption
DHCP Server
NAT Routing
NOTE: Your Dell Wireless 2350 Broadband Router came with factory default settings that should work for the majority of
the network usage scenarios. However, there are cases where your network environment may require a different
router configuration.
Back to Contents Page
Default
admin
admin
Dell Wireless 2350 BroadBand router
192.168.2.1
255.255.255.0
<obtain from ISP via DHCP>
Enabled
wireless
Auto
No Encryption
Enabled
Enabled