Static Routing - Dell 2350 User Manual

4. Select TCP (Transmission Control Protocol), or UDP (User Datagram Protocol), or
both protocols as the Trigger Port Type.
5. Specify the range of the Public Ports by typing the start and end port numbers in the
required fields.
6. Select TCP (Transmission Control Protocol), or UDP (User Datagram Protocol), or
both (TCP and UDP) as the Public Port Type.
7. Click the Submit button to activate the setting.
Click the Submit button to store the changes.

Static Routing

Static routes are manually configured routes to remote networks. That is, the route is
predefined and is not discovered by the Routing Information Protocol (RIP), as in dynamic
routing. Static routing allows you to assign a gateway to an IP address or network. If there are
routers on your internal network that do not function with RIP 1 or 2, you can set up a static
route to those routers.
Static Routing