Cisco Ip Phone 6800 Series Multiplatform Phones Administration Guide - Cisco IP Phone 6851 Administration Manual

Parameter
Prt file
Packet Capture
Capture File
Factory Reset
Parameter
Factory Reset
Download Status
Firmware Upgrade Status
Parameter
Firmware Upgrade Status 1
Firmware Upgrade Status 2
Firmware Upgrade Status 3
Provisioning Status
Parameter
Provisioning Profile
Provisioning Status 1
Provisioning Status 2
Provisioning Status 3
Provisioning Failure Reason
Description
Displays the file name of the PRT logs.
Displays the tab Start Packet Capture. Click this tab to initiate capture
packets. Click All to capture all packets that the phone receives or click
Host IP Address to capture packets only when src/dest is the IP address
of the phone.
You can also stop the capture process after initiating it.
Displays the file that contains the captured packets. Download the file
to see the packet details.
Description
Resets the phone when you click Factory Reset and phone is idle.
Description
Displays the upgrade status (failed or succeeded) with reason for the
same.
Description
Displays the profile file name of the phone.
Displays the provisioning status (resync) of the phone.
Displays the reason for the failure of provisioning of the phone.

Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide

Cisco IP Phone Web Page
147