Using the Menu
The menus, coupled with the three softkeys (c, a, and d), provide access for
setting features (date, time, language, units, backlight and spot temperatures),
thermal image display, and saving and viewing stored images.
To bring up the menu, press a. The text above each function softkey (c, a, and
d) corresponds to that softkey throughout all menu screens.
Press a to open and cycle through the menus.
The menu will disappear several seconds after the last press of a softkey.
Changing the Displayed Language
To change the display to present information in another language:
1. Press a until the F1 softkey label reads Language.
2. Press the softkey labeled Language.
3. Press the softkey labeled Up or Down to move the cursor to the desired
language.
4. Press the softkey labeled Back/Done to set the units.
Setting the Imager Clock
The Imager has an internal real-time clock that holds the date and time of day.
Setting the Date
To set the date:
1. Press a until Date appears over the F1 softkey.
2. Press the softkey labeled Date.
The date can be displayed in one of two formats: MM/DD/YY or DD/MM/YY.
3. Press the softkey labeled with the desired date format.
4. Press the softkey labeled Up (c) or Down (d) to adjust the selected date
element.
5. Press the softkey labeled Next to move to the next date element.
6. Press the softkey labeled Done when finished.