Syntax
show mac address-table count [ vlan
Parameter
vlan-
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the total MAC entry information in different VLANs:
T1600G-52TS(config)# show mac address-table count
16.14
show mac address-table address
Description
The show mac address-table address command is used to display the
information of the specified MAC address.
Syntax
show mac address-table address
port
Parameter
mac-addr
port
lagid
vlan-id
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the information of the MAC address 00:00:00:00:23:00 in VLAN 1:
T1600G-52TS(config)#show mac address-table address 00:00:00:00:23:00
vid 1
——
id
Specify the VLAN which the MAC entries belong to.
lagid
| port-channel
} | vid
——
The specified MAC address.
——
The Ethernet port number.
—— The ID of the LAG.
——
Specify the VLAN which the entry belongs to.
vlan-id
]
mac-addr
[ interface { gigabitEthernet
vlan-id
]
122