Radio - Kenwood KDC-220UI Instruction Manual

GETTING STARTED
F/W UPDATE
UPDATE SYSTEM
F/W UP xxxx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading
is not activated).
For details on how to update the firmware, see
<www.kenwood.com/cs/ce/>.
CLOCK
CLOCK DISPLAY ON: The clock time is shown on the display even when the
unit is turned off. ; OFF: Cancels.
ENGLISH
Select the display language for [FUNCTION] menu and music
РУССКИЙ
information if applicable.
By default, [ENGLISH] is selected.
ESPANOL
6
ENGLISH

RADIO

Search for a station
1
Press repeatedly to select RADIO.
2
Press repeatedly (or press
select FM1/FM2/FM3/MW/LW.
3 Press S / T (or press S /
station.
• To change the searching method for S / T: Press
AUTO1 : Automatically search for a station.
AUTO2 : Search for a preset station.
MANUAL : Manually search for a station.
• To store a station: Press and hold one of the number buttons (1 to 6).
• To select a stored station: Press one of the number buttons (1 to 6) (or press one
of the number buttons (1 to 6) on the remote control).
Direct Access Tuning
(using the remote control) (for
1
Press DIRECT to enter Direct Access Tuning.
2
Press the number buttons to enter a frequency.
3
Press to search for a station.
• To cancel, press or DIRECT.
• If no operation is done for 10 seconds after step
automatically canceled.
/ on the remote control) to
on the remote control) to search for a
repeatedly.
)
2
, Direct Access Tuning is