Cisco NCS 4200 Series Configuration Manual page 29

ITU-T G.8032 Ethernet Ring Protection Switching
SUMMARY STEPS
1. enable
2. configure terminal
3. ethernet ring g8032 ring-name
4. port0 interface type number
5. monitor service instance instance-id
6. exit
7. port1 {interfacetype number | none}
8. monitor service instance instance-id
9. exit
10. exclusion-list vlan-ids vlan-id
11. open-ring
12. instance instance-id
13. description descriptive-name
14. profile profile-name
15. rpl {port0 | port1} {owner | neighbor | next-neighbor }
16. inclusion-list vlan-ids vlan-id
17. aps-channel
18. level level-value
19. port0 service instance instance-id
20. port1 service instance {instance-id | none }
21. end
DETAILED STEPS
Command or Action
Step 1 enable
Example:
Device> enable
Step 2
configure terminal
Example:
Device# configure terminal
Step 3 ethernet ring g8032 ring-name
Example:
Device(config)# ethernet ring g8032 ring1
Purpose
Enables privileged EXEC mode.
Enters global configuration mode.
Specifies the Ethernet ring and enters Ethernet ring port
configuration mode.
LAN Switching Configuration Guide, Cisco IOS XE Everest 16.6.1 (Cisco NCS 4200 Series)
Configuring the Ethernet Protection Ring
• Enter your password if prompted.
23