SETTING MENU:
Remote Lock Off Mode:
This mode receives an input signal from the remote
control unit or from the Remote In-Jack on the rear
panel.
Remote Lock On Mode:
This mode dose not receive an input signal from
the remote control unit or from the Remote In-Jack
on the rear panel.
Perform the setting using the following procedure.
1. Press [ON/STANDBY] and [STOP] buttons on the
front panel simultaneously for over 3 seconds to
engage "Remote Lock Mode".
2. Press [STILL/PAUSE] button on the remote control
unit to set to "On" or "Off". When "Remote Lock
On", Fig. a appears on the VFD. "REMOTE LOCK
ON" will appear in the upper right corner on the
screen.
Fig. a VFD in Remote Lock On Mode
When "Remote Lock Off", Fig. b appears on the
VFD. "REMOTE LOCK OFF" will appear in the
upper right corner on the screen.
Fig. b VFD in Remote Lock Off Mode
a. If [STILL/PAUSE] button is not pressed for 5
seconds or any other button is pressed within 5
seconds, the unit will be released from
"Remote Lock Mode".
b. When initializing, set the Remote Lock Mode
"off".
REMOTE LOCK MODE
17
DVD-1940CI/758