How To Initialize The Dvd Player - Denon DVD-758 Service Manual

HOW TO INITIALIZE THE DVD PLAYER

To put the program back at the factory-default,
initialize the DVD player using the following procedure.
1. Press [1], [2], [3], [4], and [DISPLAY] buttons on
the remote control unit in that order.
Fig. a appears on the screen.
" ******* " differ depending on the models.
MODEL : *******
Version : *.**
Region : *
LD OPERATING TIME
TIME(DVD) : *:**
TIME(CD)
EEPROM CLEAR : CLEAR
2. Press [CLEAR] button on the remote control unit.
Fig. b appears on the screen.
" ******* " differ depending on the models.
MODEL : *******
Version : *.**
Region : *
LD OPERATING TIME
TIME(DVD) : *:**
TIME(CD)
EEPROM CLEAR : OK
EEPROM CLEAR : CLEAR
When "OK" appears on the screen, the factory
default will be set.
3. To exit this mode, press [POWER OFF] button.
LD OPERATING TIME:
It indicates the DVD/CD operating time in Fig. a.
It is accumulated in the flash memory every time the
power is turned off.
To reset the LD OPERATING TIME, overwrite the
FIRMWARE.
: *:**
EXIT: POWER
Fig. a
: *:**
EXIT: POWER
Fig. b
13
DVD-1940CI/758