Table of Contents
Advertisement
FUNCTIONAL OVERVIEW
FRONT PANEL
1
2
13
REMOTE CONTROL
1
14
15
16
17
18
19
20
21
22
23
6
24
5
25
26
27
The buttons with circled numbers can only be operated with
the remote control.
Loading the Batteries
1. Open the battery compartment cover.
2. Insert two "R6P" (AA) batteries, with
each one oriented correctly.
3. Close the cover.
6/25
3
4 5
7/29
10
8
12
11
9
10. HDMI Button [page 17]
36
3
11. STILL/PAUSE Button [page 19]
35
12. Display, Remote Sensor Window
13. HDMI indicator [page 17]
34
14. A-B REPEAT Button [page 22]
33
15. REPEAT Button [page 21]
16. RANDOM Button [page 22]
32
17. ZOOM Button [page 19]
31
18. CLEAR Button [page 21]
19. ANGLE Button [page 28]
20. MENU Button [page 18]
21. ENTER Button [page 18]
30
22. Cursor Buttons [page 18]
23. RETURN Button [page 18]
24. SEARCH MODE Button [page 20]
25. h (Fast Reverse SEARCH) Button [page 19]
7
4
29
26. GROUP Button [page 18]
11
27. SUPER AUDIO CD SET UP Button [page 28]
28. PAGE Buttons [page 18]
29. g (Fast Forward SEARCH) Button [page 19]
28
30. SETUP Button [page 29]
31. SUBTITLE Button [page 27]
32. TOP MENU Button [page 18]
33. DISPLAY Button [page 25]
34. AUDIO Button [page 27]
35. Numeric Buttons [page 17]
36. MODE Button [page 19]
Cautions On Batteries
• Use "R6P" (AA) batteries in this remote control unit.
• Replace the batteries with new ones approximately once a year, though this
depends on the frequency with which the remote control unit is used.
• If the remote control unit does not function within a close proximity of the main
unit, replace the batteries with new ones, even if less than a year has passed.
• The included batteries are only for verification purpose. Replace them with
new batteries as soon as possible.
• When inserting the batteries, be careful to do so in the proper direction,
/
following the
and
compartment.
• To prevent damage or battery fluid leakage:
• Do not mix a new battery with an old one.
• Do not mix two different types of batteries such as alkaline and manganese.
• Do not short-circuit, disassemble, heat or dispose of batteries in flames.
• Remove the batteries when not planning to use the remote control unit for a
long period of time.
• If the batteries should leak, carefully wipe off the fluid from the inside of the
battery compartment, then insert new batteries.
– 8 –
1. POWER ON/OFF (ON/STANDBY) Buttons [page 17]
2. Disc loading tray
3. OPEN/CLOSE Button [page 17]
4. PLAY Button [page 17]
5. STOP Button [page 17]
6. H (SKIP DOWN) Button [page 20]
7. G (SKIP UP) Button [page 20]
8. DIMMER NTSC/PAL Button [page 17]
9. PURE DIRECT Button [page 17]
Press to activate Pure Direct function to reduce noise
level.
Press to set the HDMI connector's video signal output
mode.
Lights up when there is video signal output from the
HDMI OUT jack.
Press more than 2 seconds when you use the front
panel button for this function.
Press more than 2 seconds when you use the front
panel button for this function.
=
marks in the remote control unit's battery
EN
Advertisement
Table of Contents
