Foot Brake; Table Tilt - Grizzly G0636X Owner's Manual

Foot Brake

The Model G0636X is equipped with a foot brake
(Figure 44). Use the brake only in emergency
situations to stop power from going to the motor
and bring the blade to a halt.
The foot brake will not stop the bandsaw
wheels and blade instantly. DO NOT become
over confident and relax your safety aware-
ness because of the foot brake feature.
Figure 44. Foot brake location.
Model G0636X/G0636XB (Mfd. Since 04/17)

Table Tilt

Personal injury or death
can occur if the bandsaw
starts during table adjust-
ment. Disconnect power
from the bandsaw before
performing table adjust-
ments.
The bandsaw table will tilt 5˚ left and 45˚ right to
provide a wide range of cutting options.
To tilt the table:
1.
DISCONNECT BANDSAW FROM POWER!
2. Loosen the table tilt lock lever shown in
Figure 45.
Lock Lever
Figure 45. Table tilt controls.
3. To tilt the table to the right, turn the table tilt
handwheel clockwise (Figure 45).
4. To tilt the table to the left, turn the table tilt
handwheel clockwise one turn, lower the
positive stop bolt, then turn the handwheel
counterclockwise.
5. Secure the table tilt lock lever.
6. Follow "Positive Stop" instructions on Page
19 for resettting the stop bolt and table for
horizontal (0º) operations.
Table Tilt Handwheel
-35-