Table of Contents
Advertisement
Wireless-G PrintServer with Multifunction Printer Support
Chapter 4: Configuring the PrintServer Using the Setup
Wizard
Installation
To install the PrintServer, you will use the Setup CD-ROM to run the Setup Wizard. It is highly recommended that
you use a computer on the wired network to set up the PrintServer. However, if you only have a wireless network,
then you can use a computer on the wireless network to set up the PrintServer.
1. Insert the Setup CD-ROM into the computer's CD-ROM drive. The Setup Wizard should run automatically. If it
does not, click the Start button and choose Run. In the box that appears, enter D:\setupWizard.exe (if "D" is
the letter of your CD-ROM drive).
2. When you see the Welcome screen, click Setup Wizard to continue. Click Exit to end the installation. Click
User Guide button to view the User Guide.
3. If this is the first time you have installed the PrintServer, click Set up PrintServer. If you have already
installed and configured the PrintServer, click Set up Computer and proceed to Chapter 5: Windows Driver
Installation.
Chapter 4: Configuring the PrintServer Using the Setup Wizard
Installation
Figure 4-1: Welcome
Figure 4-2: Set up PrintServer
8
Hide quick links:
Advertisement
Table of Contents
