Wireless-G PrintServer with Multifunction Printer Support
WPA-Pre-Shared Key
Enter a Pre-Shared Key that is 8-63 characters in length. Click Next to continue, or click Back to return to the
previous screen.
16. The Confirmation screen will appear. Your old and new settings will be displayed. If you want to save the new
settings, click Next. If you want to make a change, click Back to make changes.
Please wait a few moments while the system changes the PrintServer's settings.
NOTE: In the next few screens, you will need to disconnect and reconnect your PrintServer. Proceed in the order
specified to avoid any networking conflicts.
Chapter 4: Configuring the PrintServer Using the Setup Wizard
Installation
Figure 4-17: Wireless Security - WPA-Pre-Shared
Figure 4-18: Confirm New Settings
16