Appendix; Troubleshooting - PRESONUS FaderPort 16 Owner's Manual

9

Appendix

9.1

Troubleshooting

9 Appendix
9.1 Troubleshooting
Session Navigator and Scribble Strips not responsive. Make sure
you are in the correct mode for your DAW application and that the
FaderPort is configured as the correct device type in your DAW:
DAW
Ableton Live
Apple Logic
Avid Pro Tools
Cakewalk Sonar
MOTU Digital Performer
PreSonus Studio One
Steinberg Cubase
Steinberg Nuendo
Others
Track Names Not Updating. If you connect your FaderPort 16 while
a session is already open, the track names on the scribble strips
may not update immediately. To update, bank left or right.
First Eight Faders Mirrors Second Eight Faders. If your FaderPort 16 fader
back splits into two identical banks of eight, it has not been configured properly.
In general, the first FaderPort 16 MIDI port should be used for the first Mackie
Control or HUI device and the second FaderPort 16 MIDI port should be
used for the Mackie Control Extender or second Mackie Control / HUI device.
The exception is Cubase. Please review the instructions in this manual.
Recommended Mode
MCU (Logic)
MCU (Logic)
HUI
MCU (Sonar)
MCU (Logic)
Studio One
MCU (Cubase)
MCU (Cubase)
MCU (Logic): If "FaderPort 16" is not listed as a supported
device in your DAW, you will need to configure it as either (2)
Mackie Control devices or (1) Mackie Control and (1) Mackie
Control Extender depending on the application.
OR
Studio One: If FaderPort 16 is listed as a supported device by
your DAW, it has been integrated into your application using
the Studio One native protocol.
FaderPort™ 16
Owner's Manual
60