Casio QV-780 Service Manual & Parts List page 22

19.Peel off the caution label.
Caution: Since high-voltage is applied on the circuits on Camera Unit, there is a risk of electric shock.
Before proceeding to the following steps, discharge 70 µF, 300 V capacitor with a 1.5 kohm,5 W cement
resistor.
20.Remove two screws and disconnect two wires red and white.
21.Remove Strobe unit 1-3 .
22.Remove two screws from the gear.
Peel off the adhesive tape wrapped around the case shaft.
1.5 kohm/5W
resistor
— 20 —