Casio QV-780 Service Manual & Parts List page 21

14.Lift up the stopper tab of connector CN700 and disconnect FPC cable. Also disconnect connector CN920.
15.Remove the BRIGHT knob T and take PCB Ass'y/Linear off the case.
Note: Be careful not to bend or break the LED on the other side of the PCB.
16.Remove Three screws l from BL ass'y _ then remove the BL ass'y.
Note: Do not touch BL ass'y with naked hand.
17.Remove Spacer ] and Display Ass'y [.
Note: Do not touch Display Ass'y with naked hand.
Camera Unit
18.Remove three screws h and m.
— 19 —