Casio QV-780 Service Manual & Parts List page 20

10.Lift up the buttom of the battery compartment and remove Holder/Battery 3 and PCB Ass'y/Digital.
11. Take Knob/Selector 6 and PCB Ass'y/Key 5 off the case.
Note: Knob/Selector 6 can be removed by unscrewing two screws f from the bottom of the knob.
12.Peel Grip K then remove one screw h from Panel/Rear J.
Unclip the E-ring from Pin J.
Note: Peel Panel/Rear carefully off Case/Lower E as it is attached with adhesive tapes.
Removing LCD Unit
13.Remove four screws l from PCB Ass'y/Linear a.
Note: Before you remove Holder/Battery 3, be
sure that CompactFlash card release lever
is in upright position.
— 18 —