Roland Aoutique TR-09 User Manual page 24

MUTE/ UNMUTE/ SOLO
MUTE/SOLO Settings Here's how to make mute/solo settings for each sound.
1. Hold down the [SHIFT] button and press the [INSTRUMENT SELECT] (don't release them yet).
2. While continuing to hold down the [SHIFT] button and [INSTRUMENT SELECT] button,
press the [ENTER] button to select either "NutE" (MUTE) or "SoLo" (SOLO).
3. While continuing to hold down the [SHIFT] button and [INSTRUMENT SELECT] button, press a main key [1]–[16]
to select the sound that you want to mute/solo. The main key of the sound for which you specified mute/solo blinks.
4. By pressing the [CLEAR] button while continuing to hold down the [SHIFT] button and [INSTRUMENT SELECT]
button, you can clear mute/solo for all sounds.
NOTE - This functionality Added to the TR-09 (Ver. 1.04)
COPY/PASTE
You can easily copy patterns and paste them into other pattern locations. Its a little bit backward, but it works. You just
have to remember to select the destination BANK, GROUP, and MAIN KEY location first.
Here's the procedure for copying and pasting a pattern
1. Select the paste-destination pattern:
Hold down the [SHIFT] button and press the following buttons in the order given
BANK (I, II)
PATTERN GROUP (1-3)
MAIN KEY (1-16)
2. Select the copy-source pattern.
Hold down the [SHIFT] button and press the following buttons in the order given
[COPY] (11)
Screen will display 'COPY'
BANK (I, II)
PATTERN GROUP (1-3)
MAIN KEY (1-16) → [ENTER]
24