Avaya P333T Quick Start Manual page 7

Setting the Parameters
If you wish to change the default parameters shown and configure the mandatory
parameters, we recommend that you use the Command Line Interface (CLI).
! For further information, please refer to Chapter 6 of the Avaya P330 User's Guide.
Default Switch Parameters
Configuration Parameter
Avaya P330 IP Address
BootP Mode
Default Gateway
Management PC SLIP IP Address
VLAN Management ID
Spanning Tree
TFTP Mode
TFTP Server
TFTP File Name
Default Port Parameters
Configuration Parameter
Port Speed and Duplex Mode
Flow Control
Backpressure
Auto-negotiation
Administration State
Port VLAN ID
Tagging Mode
Port Priority
Default Setting
149.49.32.134
Never
0.0.0.0
192.168.10.2
1
Enabled
Limited
0.0.0.0
viisa
Default Setting
• 10/100-TX ports: Auto-negotiation
• 100Base-FX ports: 100 Mbps full duplex
• 1000Base-X ports: 1000 Mbps full duplex
• 10/100 and 100 Mbps: Disabled
• 1000 Mbps: Disabled (no pause)
• 10/100: Enabled (when in half duplex mode)
• 100Base-FX & 1000 Mbps: Not applicable
• 10/100-TX ports: Enabled
• 100Base-FX ports: Not applicable
• 1000Base-X ports: Enabled
Enabled
1
Clear
Regular
5