Installation
Prerequisites
Set jumpers
Table 3
jumper blocks (JX1, JX2) that control the host adapter's device ID. The default
device ID is FA00.
Table 3: Jumper settings
FA00
1AE5
FA01
18
FCA2684/FCA2684DC PCI-X Host Bus Adapters for OpenVMS and Tru64 UNIX Installation
PCI 32/64-bit data and 33/66 MHz clock frequency
PCI-X 64-bit data and 66/100/133 MHz clock frequency
32/64-bit addressing, 3.3V signaling (5V tolerant)
3.3V and 5V PCI power required for operation
Media and connectors
Multimode fiber optic cable with LC connector, used with short-wave lasers.
lists the FCA2684/FCA2684DC jumper settings.The HBA has two
Figure 1
See
Device ID
Jumper Setting
JX1:1-2, JX2:2-3
JX1:2-3, JX2:2-3
JX1:2-3, JX2:1-2
on page 13 for detailed descriptions.
Guide